Standard Water Resistant Gloves, Elbow Length
American BioTech Supply's line of gloves for cryogenic applications are manufactured in two configurations: Standard Series Water Repellent and 100% Waterproof Series. The Standard Series is recommended for use where the protection requirement is mainly against cold as opposed to protection against splashing or dripping liquid, in which case the Waterproof Series would be recommended. The sequence of insulating layers is the same for both series of gloves. This consists of three layers: two layers of insulation material are bonded together at the edges of each piece enabling insulating air to be trapped without adding additional weight or bulk and is then complimented with an inner lining that adds insulating value and is specifically designed to wick moisture away from the skin. The Waterproof Series gloves incorporate a thin seamless, 100% waterproof inner protective layer. The Wrist style gloves on both Series also incorporates an uninsulated knit cuff.
Under no circumstances should any of these gloves be submerged directly in liquid nitrogen or used with liquid oxygen.
Sizing: CryoGuard gloves are available in four sizes: Small, Medium, Large and Extra Large. These four sizes correspond to European and American sizes of 8, 9, 10 and 11. They are available in Wrist, Mid-Arm, Elbow and Shoulder lengths.
|ABS CG EB S||Small|
|ABS CG EB M||Medium|
|ABS CG EB L||Large|
|ABS CG EB XL||Extra Large|