user-circle-o search facebook linkedin2 twitter document-download info
A large, white, double-door medical refrigerator labeled Med Fridge stands upright. It has vertical handles, a vent and control panel at the bottom, and branding for American BioTech Supply at the top left corner.
A large, white, double-door medical refrigerator labeled Med Fridge stands upright. It has vertical handles, a vent and control panel at the bottom, and branding for American BioTech Supply at the top left corner.

49 Cu. Ft. Capacity Standard Certified to NSF/ANSI 456 Pharmacy Solid Door Refrigerator

Product Number: PH-ABT-NSF-S49S
intertek-etl-listed-us-mark-seeklogo31 (002)*ul*Green-Leaf-ABS

These standard upright refrigerators are designed in accordance with the NSF/ANSI 456 Standard for Vaccine Storage. Refrigerators protect pharmaceuticals at optimal temperatures, preventing waste and allowing for peak delivery.

These solid door refrigerators utilize microprocessor controllers and feature temperature alarms, remote alarm contacts, LED interior lighting, and probe access ports. American Biotech Supply Vaccine Storage Refrigerators utilize HFC-free refrigerant for environmental health and energy efficiency.

For more information on Vaccine Storage: Vaccine Storage
The acceptable temperature ranges for vaccine storage are 36°F to 46°F (or 2°C and 8°C) in the refrigerator and -58°F and 5°F (or -50°C and -15°C) in freezers.

*-one or more of these certifications may apply to this unit.

 

Description Double Solid Door Pharmacy/Vaccine Upright Refrigerator
Operational environment Indoor use only, +18°C to +26°C (+65°F to +78°F), <70% RH
Storage capacity 49 cu. ft. gross volume
Door Two swing solid doors, self-closing, non-reversible, magnetic sealed gaskets, keyed locks
Shelves Ten shelves (eight adjustable/one fixed) with guard rail on back
Mounting 3 1/2″ Swivel Casters (two locking)
Interior lighting Shielded, switched LED lighting, full coverage, balanced spectrum
Airflow management Forced Air technology, patent pending
External probe access Rear wall port (3/4″) dia.
Insulation Cabinet is foamed-in-place with EPA compliant high density urethane foam
Exterior materials White powder coated steel
Access control Pyxis®, Omnicell® and AcuDose RX® compatible
General warranty One (1) year parts and labor warranty, excluding display probe calibration
Compressor warranty Five (5) years compressor warranty
Product Weight 402 lbs
Shipping Weight 452 lbs
Rated Amperage 4.5 Amps
Power Plug/Power Cord NEMA 5-15 plug, 8 to 10 ft typical, conforms to UL471 requirements, Vaccine Storage power cord warning label
Facility Electrical Requirement 110-120V AC: 15 A (minimum)
Agency Listing and Certification Certified with the temperature performance requirements as defined in the NSF/ANSI 456 Standard for Vaccine Storage for all testing scenarios. UL, C-UL, ETL, C-ETL listed and certified to UL471 standard, hydrocarbon refrigerant safety.
Included Accessories Pharmacy refrigerator/freezer toolkit and temperature logs

 

Uniformity¹ (Cabinet air) +/- 1.0°C
Stability² (Cabinet air) +/- 0.9°C
Maximum temperature variation (Cabinet air) +/-1.2°C
Temperature rise after 8 sec door openings Temperature did not exceed 6.0°C at any probe for all required NSF/ANSI 456 testing protocolsᶟ
Recovery after 3 min door opening All probes recover to under 8°C within 6.5 min.
Energy consumption 1.45 KWh/day⁴
Average heat rejection 3.15 KWh/day (448 BTU/h)⁴
Noise pressure level (dBA) 48 or less installed
Pull down time to 4°C nominal operating temp 45 min

Controller technology                                              Parametric, microprocessor, LED display with 0.1°C resolution

Temperature setpoint range                                   1°C to 10°C (Controller settings must remain unaltered to ensure thermal performance compliant with NSF/ANSI 456 Standard for Vaccine Storage requirements)

Calibration                                                              Calibrated using a NIST traceable device, certificate included

External alarm connection                                      State switching remote alarm contacts

Alarms                                                                    High / Low temperature, compliant with alarm requirements defined in the NSF/ANSI 456 Standard for Vaccine Storage

Simulator ballast                                                    Glass bead thermal media

 

Inquire About This Product