user-circle-o search facebook linkedin2 twitter document-download info
A white medical freezer with ABS American BioTech Supply and Med Freezer text on the door. An electronic display shows -20.0°C. The freezer has a handle, a lock, and a green energy seal at the bottom right corner. This NSF/ANSI 456 compliant vaccine freezer is right hinged.
A white medical freezer with ABS American BioTech Supply and Med Freezer text on the door. An electronic display shows -20.0°C. The freezer has a handle, a lock, and a green energy seal at the bottom right corner. This NSF/ANSI 456 compliant vaccine freezer is right hinged.

4.2 cu. ft. capacity Vaccine Built-In Undercounter Freezer ADA Certified to NSF/ANSI 456

Product Number: PH-ABT-NSF-UCBI-0420-ADA

intertek-etl-listed-us-mark-seeklogo31 (002)*ul*Green-Leaf-ABS


These premier freestanding countertop freezers are designed in accordance with the NSF/ANSI 456 Standard for Vaccine Storage. Freezers protect pharmaceuticals at optimal temperatures, preventing waste and allowing for peak delivery.

These models utilize microprocessor controllers and feature temperature alarms, remote alarm contacts, LED interior lighting, and probe access ports with included probes. American Biotech Supply Vaccine Storage Refrigerators utilize HFC-free refrigerant for environmental health and energy efficiency

For more information on Vaccine Storage: Vaccine Storage
The acceptable temperature ranges for vaccine storage are 36°F to 46°F (or 2°C and 8°C) in the refrigerator and -58°F and 5°F (or -50°C and -15°C) in freezers.

*-one or more of these certifications may apply to this unit.

Description Single Solid Door Pharmacy/Vaccine Undercounter Manual Defrost Freezer Built-In ADA
Operational environment Indoor use only, +18°C to +26°C (+65°F to +78°F), <70% RH
Storage capacity 4.2 cu. ft. gross volume
Door One swing solid door, self-closing, right hinged, non-reversible, magnetic sealed gasket, keyed lock
Shelves Two shelves, fixed
Mounting Low profile roller wheels and leveling legs
Interior lighting N/A
External probe access Rear wall port (3/4″) dia.
Insulation Cabinet is foamed-in-place with EPA compliant high density urethane foam
Exterior materials White powder coated steel
Access control Pyxis®, Omnicell® and AcuDose RX® compatible
General warranty Two (2) years parts and labor warranty, excluding display probe calibration
Compressor warranty Five (5) years compressor warranty
Product Weight 100 lbs.
Shipping Weight 132 lbs.
Rated Amperage 1.5 Amps
Power Plug/Power Cord NEMA 5-15 plug, 8 to 10 ft typical, conforms to UL471 requirements, Vaccine storage power cord warning label
Uniformity¹ (Cabinet air) +/- 2.6°C
Stability² (Cabinet air) +/- 2.1°C
Maximum temperature variation (Cabinet air) +/- 2.9°C
Temperature rise after 5 sec door openings Temperature did not exceed -17.5°C at any probe for all required NSF/ANSI 456 testing protocolsᶟ
Recovery after 60 sec door opening All probes recover to under -15°C within 8.2 min.
Energy consumption 0.97 KWh/day⁴
Average heat rejection 1.97 KWh/day (224 BTU/h)⁴
Noise pressure level (dBA) 49 or less installed
Pull down time to nominal operating temp 51 min

 

Controller technology
Parametric, microprocessor, LED display with 0.1°C resolution
Temperature setpoint range
-15°C to -28°C (Controller settings must remain unaltered to ensure thermal performance compliant with NSF/ANSI 456 requirements)
Calibration
Calibrated using a NIST traceable device, certificate included
External alarm connection State switching remote alarm contacts
Alarms
High / Low temperature, compliant with alarm requirements defined in the NSF/ANSI 456 standard for vaccine storage
Simulator ballast
Glass bead thermal media

 

Inquire About This Product