user-circle-o search facebook linkedin2 twitter document-download info
A white medical refrigerator with glass front door, digital temperature display showing 4.8°C, and three wire shelves. The door is labeled “ABS American Biotech Supply Med Fridge.” An NSF/ANSI 456 certification sticker is on the lower right corner.
A white medical refrigerator with glass front door, digital temperature display showing 4.8°C, and three wire shelves. The door is labeled “ABS American Biotech Supply Med Fridge.” An NSF/ANSI 456 certification sticker is on the lower right corner.
PH-ABT-NSF-UCFS-0104G DataSheet

1 cu. ft. Glass Door Freestanding Countertop Vaccine Refrigerator Certified to NSF/ANSI 456

Product Number: PH-ABT-NSF-UCFS-0104G
ETL_Sanitation-listed3intertek-etl-listed-us-mark-seeklogo31 (002)*ul*Green-Leaf-ABS

These premier countertop refrigerators are designed in accordance with the NSF/ANSI 456 Standard for Vaccine Storage. Refrigerators protect pharmaceuticals at optimal temperatures, preventing waste and allowing for peak delivery.

These glass door freestanding refrigerators utilize microprocessor controllers and feature temperature alarms, remote alarm contacts, LED interior lighting, and probe access ports with included probes. American Biotech Supply Vaccine Storage Refrigerators utilize HFC-free refrigerant for environmental health and energy efficiency.

For more information on Vaccine Storage: Vaccine Storage
The acceptable temperature ranges for vaccine storage are 36°F to 46°F (or 2°C and 8°C) in the refrigerator and -58°F and 5°F (or -50°C and -15°C) in freezers.

*-one or more of these certifications may apply to this unit.

Product Inquiry
Description
Description Single Glass Door Pharmacy/Vaccine Undercounter Refrigerator Freestanding Right Hinged
Operational environment Indoor use only. Optimal operating range: +18°C to +26°C (+65°F to +78°F), <70% RH
Storage capacity 1 cu. ft. gross volume
Door One swing glass door, self-closing, right hinged, non-reversible, magnetic sealed gasket, keyed lock
Shelves Three shelves (two adjustable/one fixed) with guard rail on back
Mounting and Installation Leveling legs. Note: 4″ of clearance on all sides must be maintained for adequate ventilation
Interior lighting Shielded, switched LED lighting, full coverage, balanced spectrum
Airflow management Forced Air technology, patent pending
External probe access Rear wall port (23/32″) dia.
Insulation Cabinet is foamed-in-place with EPA compliant high density urethane foam
Exterior materials White powder coated steel
Access control Pyxis®, Omnicell® and AcuDose RX® compatible
General warranty Two (2) years parts and labor warranty, excluding display probe calibration
Compressor warranty Five (5) years compressor warranty
Product Weight 66 lbs.
Shipping Weight 94 lbs.
Rated Amperage 0.9 A max
Power Plug/Power Cord NEMA 5-15 plug, 8 to 10 ft typical, conforms to UL471 requirements, Vaccine storage power cord warning label

 

Uniformity¹ (Cabinet air) +/- 1.5°C
Stability² (Cabinet air) +/- 0.7°C
Maximum temperature variation +/- 1.8°C
Temperature rise after 8 sec door openings Temperature did not exceed 6.8°C at any probe for all required NSF/ANSI 456 testing protocolsᶟ
Recovery after 3 min door opening All probes recover to under 8°C within 5.5 min.
Energy consumption 0.71 KWh/day⁴
Average heat rejection 1.01 KWh/day (144 BTU/h)⁴
Noise pressure level (dBA) 34 or less installed
Pull down time to nominal operating temp 35 min

 

 

Controller technology Parametric, microprocessor, LED display with 0.1°C resolution
Calibration Calibrated using a NIST traceable device, certificate included
External alarm connection State switching remote alarm contacts
Alarms
Visual and audible indicators, High / Low temperature, compliant with alarm requirements defined in the NSF/ANSI 456 Standard for Vaccine Storage
Simulator ballast Glass bead thermal media

 

 

Inquire About This Product

This field is for validation purposes and should be left unchanged.
Name(Required)
Email(Required)
Which State is Your Business Located(Required)
US Based Phone Number Only (###) ###-####
Preferred Contact Method(Required)
If you have any additional questions, enter them here
By submitting a request, you agree and consent to the use of your information in accordance with our Privacy Policy